PULOX PO-200 Mode D'emploi page 27

11. Function Specification
Information
The Pulse Oxygen Saturation ( SpO
)
Pulse Rate ( PR )
Pulse Intensity (bar-graph)
Pulse wave
SpO Parameter Specification
2
Measuring range
Accuracy
Optical Sensor
Pulse Parameter Specification
Measuring range
Accuracy
Pulse Intensity
Range
Battery Requirement
1.5V (AAA size) alkaline batteries × 2 or rechargeable battery
Battery useful life
1.Change
brightness of
the screen.
2.Exit standby
mode.
Serial number
recovery
2
Display Mode
OLED
OLED
OLED bar graph display
OLED
0%~100%, (the resolution is 1%).
70%~100%:±2% ,Below 70%
unspecified.
Red light (wavelength is 660nm)
Infrared (wavelength is 880nm)
30bpm~250bpm, (the resolution is
1bpm)
±2bpm or±2% (select larger)
Continuous bar-graph display, the
higher display indicates the
stronger pulse.
EN
limitation
This side UP
Fragile,
handle with
care
Keep dry