Publicité
Table and pillar, Fig. 5.1 td 13t
1 Slide the drilling table (3) onto the pillar (2). Position
the table directly above the base plate.
2 Install the table bolting (b) in the table unit from the
left side and tighten it.
Table and pillar, Fig. 5.2 – 5.3 td 16t / td 16s
1 Slide the drilling table (3) with the toothed rack (5)
onto the pillar (2).
2 Install the table bolting (b) in the table unit from the
left side and tighten it.
3 Place the crank (7) onto the bolt and fasten the Allen
screw.
BA td 13-16.indd 23
All manuals and user guides at all-guides.com
23
15.04.11 10:58
Publicité
