Publicité
1
Base plate
2
Pillar
3
Drilling table
4
Machine head
5
Toothed rack
6
Guide ring of toothed rack
7
Crank
8
Keyless drill chuck
9
Grips
10 Drill chuck protection
11 Depth stop
12 Motor
13 On-Off switch
14 Belt protective hood
15 Belt clamping lever
16 Locking grip for belt tension
ASSEMBLY INSTRUCTIONS
WARNING:
For your own safety never connect plug to power source
outlet until all assembly steps are completed and you
have read and understood the safety and operational in-
structions
Column to base, Fig.4
1 Position base {A) on floor or bench.
2 Place column assembly {B) on base and align holes in
column support with holes in base.
3 To attach and fasten the pillar unit, screw the three
(or 4) screws (a) into the base plate and tighten them
with a wrench.
BA td 13-16.indd 21
All manuals and user guides at all-guides.com
Equipment
21
15.04.11 10:57
Publicité
