The Introduction Of The Panel - Detectalia V75 Manuel D'utilisation

4. The introduction of the panel

START: In the manual counting mode, press this key to start
counting.
MENU: Press this key to enter into the MENU Interface.
ENTER: In the MENU interface, press this key can save the
change and back to the previous interface. Press this
key to confirm or enter into the sub-menu.
BATCH: Press this key can turn on/off the batch function, and
the user can select the batch number among "100, 50,
20, 10, 5, off" by short pressing.
+1/+10 : In the BATCH interface short press this key to "+1"; long
press this key to "+10". In the MENU interface, press this
key to increase the number.
ADD : Press this key to turn on/off the ADD (accumulation)
function. In the MENU interface, press this key to
decrease the number.
AUTO : Press this key to choose AUTO/MANU counting mode.
In the MENU interface, press this key to return to the
previous interface.
10
Press this key to switch the counting mode for UV and MG.
MODE:
Can active or inactive UV and/or MG.
Press this key to turn on/off the IR (Infrared) function. In the
IR :
MENU interface, press this key to switch settings.
DD : Press this key to turn on/off the DD (SIZE) function.
In the MENU interface, press this key to switch settings.
1. Clear the counting result.
CLEAR :
2. In the MENU interface Press this key to return to the
previous interface.
3. Long press this key will restore to the factory setting.
V75