Detectalia V75 Manuel D'utilisation page 14

7. Detection function setting
7.4 DD detection • Press DD choose to turn on the DD function, When the display show "DD", it means the DD function is on;
otherwise, the DD function is off.
• Check the banknote with DD(size) feature.
• During the counting, if the machine detects double or dubious note, the machine will stops counting and emit beeping
sound, while the display will show the
check. Then the user can press "START" to continue counting or take all the banknotes from the stacker to count again.
• DD sensitivity setting (details please refer to the Point 7.7 - machine sensitivity parameters setting).
• Long press CLEAR after hearing the "beep" sound, then the machine restore to default successfully.
7.5 Restore to
factory setting
• Calibration paper: 80g/A6 (10.5cm×14.8cm) white paper 1pc.
7.6 Self-calibration
• First should turn off the machine, place 80g/A6 calibration paper into the machine (show as below pic.), make sure the paper
function
cover the counting and UV sensor.
• Long press START 3 seconds to make the machine enter the self-calibration (display show as the right picture). After success,
the machine will take out the calibration paper automatically.
14
message, the user should take away the last banknotes from the stacker and
V75