Operation - Detectalia V75 Manuel D'utilisation

6. Operation

Press the power switch
6.1 Turn on/off
Note: When turn on , it will start self-check and all the function words on the LCD are lit up. If there is some problem with
the sensors, then it will show the error code in the display. (details please refer to the point 7: Error code and resolution).
Press AUTO to switch the counting mode.
6.2 MNL/AUTO
AUTO: when put the banknotes on the hopper, the machine will start counting automatically.
count setting
MNL: when put the banknotes on the hopper, the user should press START to start counting the banknotes.
Notes: In the "AUTO" counting, if the notes are very soft or dirty, then it will lead to the start sensor not work.
Press ADD to turn on/off the ADD function, When the display show "ADD", it means the ADD function is on; otherwise, the
6.3 ADD function
ADD function is off. The ADD function can work with Batch function.
Press " BATCH" to turn on/off the batch function, if the user press this key again, then the user can choose the batch num-
6 .4 Batch function
ber among "100, 50, 20, 10, off", or the user can press"+1/10" to set a batch number, the batch range is "0-999.
When the banknote feeding clearance is too loose, the machine will come up with the problem of "double note" and
6.5 Banknote feeding
inaccurate counting number, etc. Then the user can rotate the adjusting screw to the anti-clockwise direction little by little
clearance adjustment
until the counting is smooth. Please noted that do not rotate it too much in case it will break the notes.
When the banknote feeding clearance is too tight, then the machine will have unsmooth counting, and the notes will be
deformed and damaged. The user should rotate the adjusting screw to the clockwise direction until the problem solved.
Notes: the adjusting screw has been set to a good position before shipping from the factory, so the user is no need to do
the adjustment when they receive the machine. Only when after a long time usage, it may need to do some adjustment.
12
to turn on/off the unit.
V75