Lehmannaudio Linear SE Mode D'emploi page 20

Amplificateur casques
Masquer les pouces Voir aussi pour Linear SE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

38
Linear SE
Thunderstorm
EN
Disconnect the unit from mains to protect it from lightning strokes and excess
voltage.
Electric overload
Do not exceed the maximum load current for power outlets, extension cables or
integrated multi sockets. Overload may cause a fire.
Fire sources
Do not put any open fire sources (e.g. burning candles) on the device.
Accessories
Use only accessories/extensions with the device which have been approved by
the manufacturer for this purpose.
Mounting
Use the device only in a safe, level position on a table, dolly or a special
designed stand. Don't drop the unit, since this may cause personal injuries and
damages to the device. When installing the device, make sure that the mains
plug will remain easily accessible.
Cleaning
Use only a dry cloth for cleaning the device.
Non-use
Pull the mains plug if the unit is not used over prolonged periods of time.
Ingress of liquids
Make sure that no dripping or spray water can enter into the interior of the unit.
Don't place objects filled with liquids (such as vases or drinking vessels) on the
device.
Power supply
Operate the device only on those mains voltages stated either on the device
label or in the manual. When in doubt about the value of the mains voltage in
your area, ask your local electricity utilities.
Fuse
Use only fuses of the same type and rating as required by the manufacturer.
Please refer to the manual!
Earth/polarity
CAUTION!
Use the device only on a power outlet with protective conductor
connection and correct polarity. Do not disable the function of
the protective conductor connection on the included power cord.
If the plug of the included cable won't fit into your mains outlet,
contact your local electrician.
Mains connection
Protect the power cord from footsteps and crushing, notably on the device plug,
the extension cord and the cable outlet on the device.
Service
All service and repair works must be carried out by an authorised service techni-
cian. Service is required if the device has been damaged in any way, for instance
if
the power cord or mains plug have been damaged,
liquid or some object has got into the unit,
the device has been exposed to rain or moisture
or if it does not function normally or after it has been dropped.
Spare parts
Only such spare parts must be used exclusively for repair works which have been
specified and approved by the manufacturer.
Linear SE
39
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Linear se usb

Table des Matières