monzana DBHC002 Manuel page 10

•Keep children and bystand-
ers away while operating the
product. Distractions may
cause you to lose control of the
product.
Service
•Have your product serviced
by a qualified repair person
using only identical replace-
ment parts. This will ensure
that the safety of the product
is maintained.
Maintenance.
•Check all screws regularly to
ensure that they sit tight. This
will ensure that the safety of
the product is maintained.
•Only use original spare parts.
Only these replacement parts
are designed and suitable for
the product. Other replace-
ment parts will not only lead to
an invalidation of the warran-
ty, they may also endanger you
and your environment.
Storage and transportation
•Make sure the product is
always stored in dry condi-
tions.
•Protect the product from
becoming damaged during
transport.
www.Deuba24online.de
Personal protective clothing
Read the instructions carefully before
using the machine. Follow the notes and
safety instructions during use.
Keep spectators away.
Danger! Rotating knives. Keep hands
and feet outside the openings, while the
machine is running.
Unplug from the mains immediately if
the cable is damaged or severed.
Wear eye and ear protection.
Do not use as a step.
19 www.Deu b a2 4o n line .de
18
Wait until the cutting tools have come to
a standstill before carrying out cleaning
or maintenance work.
STOP
Protection class II - double insulation.
Guaranteed sound power level.
92
Electrical safety
•The plug of the product must fit into the socket.
Never modify the plug in any way. Do not use an
adapter in conjunction with protectiveearth
power tools. Unmodified plugs and the appropri-
ate sockets reduce the risk of electrical shock.
•Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
•When the power is interrupted, switch the
product off and unplug at the mains. This
prevents accidental start up of the product when
power is restored.
•In the event of power interruption and
whenever the product is put down, make sure
that the locking button is unlocked and, if not,
unlock. Otherwise the product may switch on
unexpectedly when the power is restored.
•Do not misuse the cable by using it to carry the
product, to hang it up or to pull the plug out of
the socket. Keep the cable away from heat, oil,
sharp edges or moving machine parts. Damaged
or wound cables increase the risk of an electrical
shock.
•In the event that the connection cable is
damaged, it may only be replaced by a specialist.