Allied Vision Goldeye GigE Guide De Démarrage Rapide page 16

Launching the application
Step 1: Power up the camera and wait until the green Ethernet status LED
stops flashing. This indicates the boot phase is complete.
Step 2: Launch the Vimba Viewer and wait for the camera to appear in the
Detected Cameras
Step 3: Select the desired camera from the
Step 4: A new camera window appears, as shown on page 16.
Grabbing images
To start continuous image acquisition, using default camera settings, click on the
freerun button in the viewer toolbar. The freerun button is used to start and
stop the live view.
list. This may take a few seconds.
Detected Cameras
list.
16