Allied Vision Goldeye GigE Guide De Démarrage Rapide page 13

Powering up the camera
Plug the 12-pin Hirose connector into the camera and wait for the boot phase to
complete. For Cool models, use the 4-pin Hirose connector.
Hirose 12-pin connector: colors and pins
When connecting an open-ended cable to a Hirose 12-pin connector, ensure
that the pins are connected to the correct wire as described in the table below.
Note that for powering up the camera, the power connection is necessary only.
1 9
2
10
3 11 12
4 6
5
13
Pin Color
1 Blue
8
7
2 Red
Signal I/O
GND for
Ext. In/
RS232 and
GND Out
ext. power
Ext. 10.8 V to
In
Power 30.0 VDC
Level Description
Ext. ground for
RS232, TTL I/Os
(and ext. power)
Power supply