Allied Vision Goldeye GigE Guide De Démarrage Rapide page 15

GigE Status LEDs
The GigE status LEDs are located directly above the RJ-45 connector.
• Amber (Solid or flashing): Transmission
• Green (flashing): Camera is connected
The ongoing boot phase is indicated by a flashing green LED.
• Green (solid): 
Once the boot phase is complete, the LED remains green as long as the
camera is connected to power, even if connection with the host is lost.
Note the temperature status LED has no relevance for the initial startup of the
camera.
Connecting to the host computer
To connect the camera to the host computer, use a Category 5e cable or higher.
15