Publicité
Les langues disponibles
Les langues disponibles
Red\Yellow\Green LED lighting--- Power is full
Red\Yellow LED lighting----- 60% Power volume
Only Red LED lighting----- less than 20% Power volume
Switching ON/OFF (Fig 11)
The device is equipped with lock-off button to avoid unintentional starting.
To switch on
Depress the lock-off button either from left side or right side and hold it in place, meanwhile squeeze
the trigger.
To switch off
Release the trigger.
Operating the reciprocating saw
Plunge cutting (Fig 12)
When make a plunge cutting, it no need to using the clamping jaw.
1.
Place the bottom edge of the front guard onto the work piece.
2.
Switch on the tool.
3.
Tip the saw forward and plunge the saw blade into the work piece.
4.
Tilt the saw gradually, until hold it upright, and cutting along the target line.
Power indicator button
Green light
Fig.11
Fig.10
Yellow light
Red light
Lock-off button
Switch trigger
49
Publicité
