Publicité
Les langues disponibles
Les langues disponibles
charger to complete its full charging cycle.
Avoid allowing lose items like screws or nails etc. to be stored with battery packs as these or similar
items can short battery packs and cause a fire or explosion
Always unplug the charger when not in use and store in a dry secure place.
Avoid charging or storing your battery in temperatures below 0°C and above 45°C.
Cool down hot battery pack from a just-operated tool for approximately 30 minutes before attempting
to recharge.
Removing and inserting the battery pack(Fig 8)
To insert the battery pack
Aligning the battery pack with corresponding opening of the device, push it into the device until you
heard a sound of "click", it means the battery pack has been locked in place securely.
WARNING: make sure that the tool is "OFF"
To remove the battery pack from the tool (Fig 9)
Depress the battery pack release button located on either side of the battery pack.
And pull the battery pack out and remove it from the tool.
Power indicator(Fig.10)
Insert the battery to the device, and press the power indicator button. Three situations you will facing,
list as below:
Fig.8
Fig.9
Depress the release button
48
Publicité
