Télécharger Imprimer la page

PUSH VIDEO AVN801 Mode D'emploi page 8

Publicité

Les langues disponibles

Les langues disponibles

Step3: Open Internet Explorer on your laptop / computer, and enter the IP address and port number you just
found in the URL column to access this camera.
The format is http://ipaddress:portnum, such as
In the login page, enter the user name, password, and security code to access.
Note: Please skip the wizard.
Step4: Go to "Config."
If your router supports UPnP, please proceed Step5.
If your router doesn't support UPnP, note down the host name, such as MAC000e531d6ff1.ddns.eagleeyes.tw, and click
"Save". Then, access your wireless router for port forwarding as instructed in "APPENDIX 4 CONFIGURE PORT
FORWARDING" at page 23.
Step5: Go to "UPnP", and enable the UPnP service.
Then, enable "Port Mapping", and click "Save" to start port mapping automatically.
When the configurations are saved successfully, you'll see a message indicating the IP address and port
number assigned to your camera.
Note down the IP address and port number, and log out the camera.
Check your connection
Step1: Connect your laptop / PC to Internet with the wireless network other than the one this camera is
connected.
Step2: Enter the IP address or host name you just noted down and the port number in the URL address box of
the web browser, and see if you can enter the login page of the camera successfully.
The format is "http://ipaddress:portnum" or "http://hostname:portnum".
"DDNS", and enable the DDNS service.
http://192.168.2.25:88
7
in our example.

Publicité

loading

Ce manuel est également adapté pour:

Avn701