Mark Climate ERV Serie Livret Technique page 11

ELECTRICAL INSTALLATION
Warning
Power must be isolated during installation and before maintenance to avoid injury by electric shock. The
specifications of cables must strictly match the requirements, otherwise it may cause performance failure
and danger of electric shock or fire.
Power supply is AC220V/50HZ/1 Phase. Open the cover of electrical box, connect the 2 wires (L/N/) to the
terminals and connect the cable of the control panel to the board according to the wiring diagram, and join
the control panel to the cable.
Model
ERV500
ERV1000
ERV2000
Warning
We do not accept any liability for any problems caused by the user's self and non-authorized re-engineering
to the electrical and control systems.
Spec. of power supply cable
2 x 1.5 mm²
Spec. of normal controller cable
2 x 0.5 mm² (Shielded data cable, max.
10 meter)
EN
11