Zibro A2W300 Manuel D'utilisation Et D'installation page 47

6 button
The electric heater button is used to switch on the "turbo" mode function,
for heating the water to a temperature above 55°C, to enable or disable the
ventilation function and for the auto disinfection function.
Electric heater only.
1. Switch to stand-by mode.
2. Press the button, the Electrical heating icon
The water is heated by the electric heater only to the temperature set by
parameter "2".
heating the water to temperatures above 55°C in "turbo" mode.
1. Switch to stand-by mode. Check if parameter "2" > parameter "0" and is > 55°C.
2. Press the button, the electrical heating icon
3. Press the button the heating icon
heat pump boiler is now in 'turbo' mode and will heat the water to the set
temperature parameter "2".
• When pressing the
stand-by mode.
• When pressing the
mode, without the electric heater operating.
"Turbo" mode function.
1. Switch to stand-by mode. Set parameter "2" and parameter "0" to the
desired water temperature.
2. Press the button, the Electrical heating icon
3. Press the button. The heating icon
heat pump boiler is now in "turbo" mode: both methods of heating (heat
pump and electric) are now working at the same time.
• When pressing the
stand-by mode.
• When pressing the
mode, without the electric heater operating.
heating the water to temperatures above 55°C.
1. Switch to stand-by mode. Set parameter "0" to the desired water
temperature. ( max. 70°C )
2. Press the button. The heating icon
3. Press the button. The Electrical heating icon
The heat pump boiler will now heat the water to the desired set temperature.
• When pressing the
stand-by mode.
• When pressing the
mode, without the electric heater operating. The icon
shown on the display.
Enable/disable fan function when heat pump stops.
By pressing the button and hold it for five seconds the fan ventilation
is also shown on the screen. The
button the heat pump boiler will return to the
button the heat pump boiler stays in running
is also shown on the display. The
button the heat pump boiler will return to the
button the heat pump boiler stays in running
is shown on the display.
is also shown on the display.
button the heat pump boiler will return to the
button the heat pump boiler stays in running
is show on the display.
is shown on the display.
is shown on the display.
will not be
4
47