Zibro A2W300 Manuel D'utilisation Et D'installation page 44

6
7
8
9
10 Timer 'ON'
11 Timer 'Off'
OpERATIONS
4
44
Child lock
When lit the icon indicates the key lock function is enabled. The keys cannot
be operated until this function is disabled.
Left hand side temperature display
The display shows the current temperature in the lower area of the water
tank. When checking or adjusting parameters this side of the display will
show the relating parameter number. In case of any malfunction, it shows the
related error code.
Right hand side temperature display
The display shows that the current upside temperature of the water tank.
When checking or adjusting the parameter this section will display the
related parameter value. In case of any malfunction, it shows the related
error code.
Clock display
The clock display shows the current time. When reading or programming the
scheduled timer, the clock display shows the action time.
The icon indicates that the timer 'ON' function is enabled.
The icon indicates that the timer 'OFF' function is enabled.
power 'ON'
When the power to the heat pump boiler is switched on, all icons are
displayed on the controller screen for 3 seconds. The heat pump boiler will
enter into the stand-by modus.
Stand-by mode.
button
When pressing the run/stand-by mode button when the heat pump boiler is
in stand-by mode the heat pump boiler switches to running mode. The
heating- or hot water available icon
The heat pump will heat the water to the temperature as set with parameter
"0" (see chapter F), with a maximum of 55°C.
Illustration 10
will be displayed on the screen.