Power Supply - geo-FENNEL EasyTRACK Plus Mode D'emploi

Technical data EasyTRACK Plus receiver
Accuracy
Display
Temperature range
Power supply / operating time
Tones
Automatic shut-off
Dust / water protection
FEATURES
· The vertical laser line automatically aligns with the on-grade position of the receiver.
· Saves you time and money eliminating the need for manual alignment.
· One person can carry out this measuring job!
· 360° horizontal orientation in motorized mode
· Automatic axis alignment of the vertical line with on-grade postion of receiver
· Receiver can be used as remote control to position the laser line to any desired point
· Manual slow motion screw for axis alignment
· For line lasers with red and green beam
· Compatible with all geo-FENNEL line lasers with pulse function for receiver use.
These are currently:
CrossPointer5 SP , FL/G 40-PowerCross Plus/GREEN, Geo5X-L360 HP , Geo6X/GREEN,
FL/G 66-Xtreme GREEN SP , FLG 64-GREEN HP , FL 69 HP , FL 1000 HP .

POWER SUPPLY

BATTERIES OF THE EasyTRACK PLUS
Insert 4 x AA alkaline batteries into the two alkaline battery
cases on the bottom of the base (ensure correct polarity) and
lock both battery compartments.
± 1 mm
front, back, side LED
-10°C up to +50°C
3 x AA alkaline / 50 h
3 (switchable)
yes
IP 54
EN
B
11