Insert The Batteries - geo-FENNEL EasyTRACK Plus Mode D'emploi

EN
KEYPAD OF THE RECEIVER
6
7
5
1. ON/OFF sound / SHORT/LONG distance
1
8
2. LED SHORT/LONG distance
2
3. LED ON/OFF
3
4. ON/OFF receiver
5. LED Automatic function 4
6. Automatic function
7 . RIGHT
8. LEFT

INSERT THE BATTERIES

Insert 3 x AA alkaline batteries into the battery case (ensure correct polarity) on the back; close the
battery case.
OPERATION
First adjust the channel switch of the laser and the receiver to the same channel (you will find them in
the battery case of the receiver and of the base). Three channels (1, 2 and 3) are available. By using dif-
ferent channels several instruments can be operated on one construction site without any disturbances.
13