Power Supply - geo-FENNEL FLM 400 Data Mode D'emploi

EN
FEATURES
· Measuring range from 0 to 400,000 Lux
· Sampling rate 1.5 times per second
· Large LC display
· Measuring range 4,000 digits
· 41 analogue bargraph indication
· 99 values in memory for direct reading on the meter
· 16,000 values can be stored in the data logger
· MAX / MIN function
· High accuracy and short reponse time
· USB interface
· Measuring units Lux or Foot-candle (Fc)
· Meets the CIE standards
· Full cosine correction for angular incidence of light
· Data HOLD function
· Peak HOLD function (for tracing the peak signal of light pulse if least duration is 10μs)
· Automatic zeroing
· Automatic correction for non-standard light sources
· Automatic shutt-off
· Relative reading
B

POWER SUPPLY

Before first use or if the battery status indicator shows a low battery power insert a new battery. Open
the battery cover and insert a new battery (ensure correct polarity). Close the battery cover.
Note
If the instrument cannot be powered on or off the battery has to be replaced.
12