Publicité
Les langues disponibles
Les langues disponibles
V 2.9
6.
Lubricating the spray gun requires specific steps. See the Lubrication section before attempting
to lubricate.
DISCONNECTING AIR SOURCE
WARNING! Failure to follow these steps could result in severe injury, tool or property damage.
Disconnect tool from air source before cleaning, servicing, changing parts/accessories or when
not in use.
1.
Turn the air regulator to the OFF or L position.
2.
Turn off the air compressor.
3.
Disconnect the air pressure hose.
4.
Discharge any residual pressure inside the tool.
USE AND CARE OF TOOL
1.
Use the correct tool for the job. This tool was designed for a specific function. Do not modify
or alter this tool or use it for an unintended purpose.
2.
Do not carry the tool with fingers near or on the trigger/switch.
3.
Avoid unintentional starts. Be sure that the regulator/throttle switch is in the neutral or OFF
position when not in use and before connecting it to any air source.
PARTS IDENTIFICATION
Remove the parts and accessories from the packaging and inspect for damage. Make sure that all items in
the parts list are included.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and personal injury.
Contents:
•
Spray gun
•
Paint cup and lid
•
Replacement filter
•
Wrench
•
Socket Spanner
•
Brush
ASSEMBLY
NOTE: When this manual refers to a part number, it refers to the included Parts List section.
1.
Screw the paint cup (#25) onto the gun body (#40). Tighten with included wrench
(#42) until snug.
2.
Clear the breather plug (#23) of obstructions. A vacuum will form inside the cup if air cannot
enter. This will impede the flow of paint into the spray gun.
3.
Attach the air hose to the air inlet (#41).
WARNING! Shut off the air compressor or turn off the valve regulator (not included) and discharge any
residual pressure in the air line before attaching the hose.
4
HVLP Gravity Feed Spray Gun
For technical questions call: 1-800-665-8685
8059833
Publicité
