Product Introduction; Flopro-Md Installation And Operation; Tools Required - Watts Dormont FloPro-MD Manuel D'installation Et D'utilisation

Product Introduction

The FloPro-MD Model FPMD75FF is an electronic device that measures and monitors gas flow
and pressure to any gas appliance utilizing either Natural Gas (NG) or Propane (LPG) . This
system automatically converts the gas flow rate (CFH) to a gas flow capacity (BTU/hr) . The
FloPro-MD Model FPMD75FF includes the FloPro-MD measuring device, a battery pack and
plug-in power supply, as shown .
2
The FloPro-MD Model FPMD75FF for use with standby stationary generators is provided with
½" and ¾" flexlines and fittings as accessory items to assist with the installation process .
The FloPro-MD also communicates that information to an app on an Android or iOS smart
device (tablet or phone) via Bluetooth (BLTE) .
NOTICE
Installation of the FloPro-MD shall be performed by a qualified and licensed tradesman such
as a plumber and electrician, following all local, state, federal and other governmental require-
ments, and all building and construction codes and standards . Step-by-step installation
instructions depend upon the application and the configuration of the building's gas distribu-
tion system .
All installations require thorough inspection of all gas piping BEFORE installation, and testing
for and eliminating all leaks before and after installation .
FloPro -MD Installation and Operation
™

Tools Required

• Pipe wrench
• Qty 2, 12" adjustable wrenches
• Teflon tape or gas approved sealant
• Approved leak detection solution or sniffer
FloPro-MD Installation
1 . Shut off the gas supply valve .
2 . Install the FloPro-MD immediately downstream of the gas supply valve and immediately
upstream of the gas appliance . The device can be installed vertically up, vertically down or
horizontally .
NOTICE
3 . Verify the blue arrow on the cover label or the arrow in the housing is pointing in the direc-
tion of gas flow from the gas supply to the gas appliance .
FloPro -MD Installation and Operation Manual
™
1 FloPro-MD Measuring Device
2 AC-DC Power Supply
1
3 4-AA Battery Pack Power Supply
3
5