Exporting Data from FloPro
To export data from the FloPro-MD device, tap the upload box located in the upper right cor-
ner of the screen . The "loading history" progress bar will appear until complete .
Once the export is done, tap the upload box again to send an email with a CSV attachment
containing the data . Your phone or tablet must be connected to WiFi or cellular service to
send the email .
Bluetooth Communication Troubleshooting
If there is no Bluetooth communication, check the following:
• FloPro-MD is energized by the battery pack or AC-DC power supply .
• The smart device (mobile phone or tablet) has Bluetooth enabled .
• Proximity between the FloPro-MD device and the smart device .
If the communication is intermittent, check the following:
• Constant power source (battery pack may need to be recharged or batteries replaced) .
• Proximity between the FloPro-MD device and the smart device .
WARNING
!
Need for Periodic Inspection/Maintenance: Corrosive conditions and/or unauthorized adjust-
ments or repair could render the product ineffective for the service intended. Regular checking and
cleaning of the product's connection points help ensure maximum life and proper product function-
ality. DO NOT remove the housing lid for any reason as such action will void product warranty. AVOID
excessive buildup of pipe sealant or pipe tape at the inlet and out let connection points, which could
result in flow restrictions or contamination of the product.
Maintenance
FloPro-MD Removal or Replacement
• The FloPro-MD hardware should only be removed by a qualified and skilled service tech-
nician .
• Periodic cleaning of the device should be considered depending on the operating envi-
ronment .
• Do not submerse the device in any form of liquid cleaning solution .
• Apply cleaning solution to a clean cloth or sponge and remove any visible grease or
grime from the device .
FloPro
-MD Installation and Operation Manual
™
-MD
™
11