Hendi 239230 Mode D'emploi page 12

o Capacity control: You can control the performance of the appliance, just as for a gas
cooker via 17 positions ranging from 100W to 2000W.
The default position for the appliance is "1200W".
o Temperature control: you can set the temperature between 35°C and 240°C in 5°C
increments. Standard position for the appliance is 100°C. ATTENTION! The
programmed temperature is that of the glass plate and not the temperature in the pan!
•
If you choose capacity control, select "Power" using the
capacity required by means of the arrow keys, 2000W being the highest and 100W the lowest
position.
•
If you select temperature control, select "Temp" using the "
the required temperature by means of the arrow keys between 35°C and 240°C in 5°C
increments.
•
After programming the power or temperature, you can opt to programme the timer. This timer
switches the appliance off after the programmed time has been reached. You do this by pressing
the "Timer"
selecting "Timer"
180 minutes. From 0 – 10 minutes, the time adjust interval is 1 minute for each increment and 30
seconds for each decrement. From 10- 60 minutes, the time adjust interval is 5 minutes for each
increment and 1 minute for each decrement. From 60 – 180 minutes, the time adjust interval is
10 minutes for each increment and 5 minutes for each decrement.
•
Once you have reached the required result, you can switch off the appliance by pressing the
"ON/OFF" key
off.
•
If you do not use the appliance for an extended period, remove the plug from the wall-mounted
electrical socket and remove the pans from the appliance.
NOTE! Allow the appliance to cool off before you touch it. The glass plate is very hot after use.
Error codes
E01 Overheated of the PCB (internal temperature in the housing is too high, clean the filter or the
air inlet or outlet is blocked).
E02 Dry head or the temperature of the glass is too high (empty pot on the stove).
E03 Abnormal input voltage (using a generator or similar in some times).
Cleaning and maintenance
•
Always remove the plug from the socket before cleaning the appliance.
•
Beware: Never immerse the appliance in water or any other liquid!
•
Clean the outside of the appliance with a damp cloth (water with mild detergent).
•
Never use aggressive cleaning agents or abrasives. Do not use any sharp or pointed objects. Do
not use petrol or solvents! Clean with a damp cloth and detergent if necessary. Do not use
abrasive materials.
•
Clean the fan openings with the vacuum cleaner.
•
Clean the glass plate each time after use. This is to prevent any residues from burning onto the
glass plate.
Technical details
Article number
AC power supply:
Power consumption
key once more after programming the power or temperature
. You can now set the desired time. The maximum programmable time is
. The display will go off and the lights next to
239230
230-240 V a.c./50 Hz
2000W
C
key. Now you can programme the
C
" key. Now you can programme
C
, and
C
, and
will go