Kärcher PSW 18-20 Battery Manuel D'utilisation page 21

Fault
The device does not start
up
The device stops during
operation
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Device performance data
Working voltage of the battery
Idle speed
Chain oil tank volume
Cut material diameter (max.)
Working range (max.)
Determined values in acc. with EN ISO 11680-1
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
wA
Uncertainty K
WA
Front handle hand-arm vibration
value
Rear handle hand-arm vibration
value
Uncertainty K
Dimensions and weights
Length x width x height
Guide rail length
Chain pitch
Weight (without battery pack)
Subject to technical modifications.
Cause
Battery pack is empty
Battery pack is defective.
Battery pack is not inserted correctly.
Chain blocked by clippings.
The battery has overheated
Motor has overheated
PSW 18-
20
V 18
m/s 5,5
ml 50
mm 180
m 3
dB(A) 78,4
dB(A) 3
dB(A) 91,6
dB(A) 3
2
m/s 1,3
2
m/s 1,2
2
m/s 1,5
mm 2920 x
188 x 94
mm 200
in 3/8
kg 3,8
Rectification
 Charge the battery pack.
 Replace the battery pack.
 Push the battery pack into the mounting
until it latches into place.
 Remove the clippings.
 Stop working and allow the battery to cool
down to normal battery temperature.
 Stop working and allow the motor to cool
down.
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Battery-powered saw with extension
Type: 1.444-010.0
Currently applicable EU Directives
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Harmonised standards used
EN 50581: 2012
EN 55014-1: 2017
EN 55014-2: 2015
EN 60745-1:2009+A11:2010
EN ISO 11680-1:2011
EN ISO 12100:2010
Notified body, 0197 TÜV Rheinland LGA Products
GmbH; Tillystraße 2 D - 90431 Nürnberg, Germany has
carried out EC type approval, certificate number: BM
50451225 0001
The signatories act on behalf of and with the authority of
the company management.
H. Jenner
Chairman of the Board of Management
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2018/09/01
English
S. Reiser
Director Regulatory Affairs & Certification
21