Disposal; Note; Conformity - Cordivari 5150990000002 Manuel D'utilisation

English
Antifreeze mode
The "Antifreeze" mode enables the heating element of the electronic
control when the room temperature drops below a specific threshold
(please refer to the thermostat user manual). It is suggested to set this
operating mode when the room is not occupied for several days. Press
the [mode] key until this mode is selected.
Boost 2h mode
The "Boost 2h" mode can be used to quickly warm up the room. To enable
the function, press the relative [Boost 2h] key, the "2h" icon is shown on
the display. The user can exit this mode by pressing the [Boost 2h] key, the
[On/Stand-by] key or [mode].
Fil-pilote (allowed only in some European countries)*
Press the [mode] key and select the "Fil-Pilote" mode, the relative icon
will show on the display. Set the desired temperature through the [+] and
[-] keys.
Functions Key-lock
This function allows the user blocking the keypad so to avoid inadvertent
hanges. To enable the Key-lock function, press simultaneously the keys
[mode] and [+] for 3 seconds. To disable the function, repeat the same
procedure.
ECO mode
The "ECO" function can be used to reduce the electric consumption when
the room is not occupied for a certain period. To enable the function,
press the dedicated [ECO] key. Every temperature previously set is
lowered by 3°C. The "ECO" icon is shown on the display. To disable this
function, press again the [ECO] key. NOTE: This function is not available
on every thermostat model; please refer to the user manual for a precise
description of the function.
ASC function
To enable this function, press the [mode] key until displaying the "Crono"
icon. Press the [ECO] and [+] keys simultaneously for more than three
seconds to activate the "ASC" function. To exit this function repeat the
procedure.
NOTE: This function is not available on all thermostat models, please
check the relative manual for function description.
NOTE2. This function can only be activated during "Crono" mode.
Open Window Detection function
To enable the "open window detection" function, press simultaneously
the keys [ECO] and [-] for at least three seconds. To disable this function,
repeat the procedure.
NOTE: This function is not available on every thermostat model;
please refer to the user manual for a precise description of the
function.
Low battery warning
When the battery power is low, the message Batt appears on the display.
The batteries must be replaced as soon as possible.
Note: The signal is transmitted from the remote control to the
thermostat after one second from the moment the temperature/
mode/function etc. etc. have been set.
N.B. Some functions may be not supported on your thermostat.
*The version with Fil-Pilot is available for specific countries.
Please refer to the user manual.

6. Disposal

At the end of life, this appliance must be deposited in the
special collection centres for recycling, it is not an ordinary
household waste. In case of replacement, the radiator can be
sent to your distributor. Managing in this way, the end of life
of a product allows us to preserve our environment, to limit
the use of natural resources. This symbol on the product indicates the
obligation to deliver to the end of his life to a collection point specialist, in
accordance with Directive 2002/95/EC (RAEE-WEEE).

7. Note

Repairs: They must be carried out by an authorised service centre.
Compatibility with other products: Contact your supplier.
Warranty: two-year warranty from the date of purchase.
The warranty is not valid in the following cases:
• Products that are tampered with or damaged by the customer;
• Products that have been installed or used by the customer in a manner
not specified in this manual;
• Products that have been modified by the customer.

8. Conformity

GALAXY complies with the following directives:
• EN 62233:2008
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2:1997 + A1:2001 + IS1:2007 + A2:2008 ==> Cat. 2
• EN 61000-3-2:2014
• EN 61000-3-3:201
- 12 -
Cod. 1910000000308 - nv01