User Guide - Cordivari 5150990000002 Manuel D'utilisation

5. User guide

[crono] Button
[On/Stand-by]
Button
[-] Button
[Boost 2h]
Button
Low
Battery
Icon
Behavioural
Marker Icon
"Open Window
Detection"
Operating
mode icons:
6- Fil-Pilote
5- Comfort
4- Night
3- Antifreeze
2- Boost 2h
1- Stand-by
Day of the week
Mode or function
Comfort
Night
Antifreeze
Fil-Pilote
Chrono
Boost 2h
Key-lock
Eco
Open Window
Detection
A
ASC
S
C
Stand-by
Cod. 1910000000308 - nv01
Backlit display: it
allows viewing all the
information related to
the thermostat
[Mode] Button
[+] Button
[ECO] Button
Temperature
indicator
"ECO" mode
icon
Key-lock
icon
ASC
function
indicator
Clock
Description
It enables and sets the temperature
in the "Comfort" mode
It enables and sets the temperature
in the "Night" mode
It enables the "Antifrost" mode
It enables and sets the temperature
in the "Fil-Pilote" mode
It enables and sets the temperature
in the "Chrono" mode
It switches on the device set on
the maximal power for two hours
It enables the keypad lock, with
the exception of the button [On/
Stand-by]
It enables the "ECO" function
It eenables the "Open Window
Detection" function
It enables the "ASC" function
The device enters the "Standby"
mode.
Power On / Stand-by mode
Press the key [On/Stand-by] to turn on the device or to enter the
"Standby" mode. When the device is switched on, the display shows the
set temperature, mode and time. In "Stand-by" mode the current time
and day of the week are displayed.
Operating modes
Press the [Mode] key to select the desired operating mode, an icon on the
display indicates the selected operating mode (as in the legend below).
Fil-pilote Comfort
Comfort* mode
The temperature "Comfort" corresponds to the temperature that the user
desires. This operating mode is intended for the ordinary employment of the
thermostat. Press the [Mode] key until the "Comfort" icon is shown on the
display. Set the desired temperature through the [+] and [-] keys.
Night mode
The "Night"mode sets a value of temperature below the "Comfort"
Temperature value. It is suggested to set this operating mode during the
night or when the room is not occupied for 2 or more hours. Press the
[Mode] button until the "Night" icon appears on the display. Use the [+]
and [-] keys to set the desired temperature.
Chrono mode
This operating mode allows the user to confi gure diff erent temperature
values for each hour of each day of the week. The "Comfort" / "Night"
temperatures and the related time intervals can be thus programmed.
To activate this function, press the [Prog] button until the "Chrono" icon
is displayed. Setting the time sequence: press the [crono] button to enter
the programming mode.
a) Setting time and date: the fl ashing digit indicates the day of the week:
press the [+] and [-] keys to set the desired day, press [mode] to confirm.
Use the [+] and [-] keys to set the hour and then [mode] to advance to the
minutes setting. Repeat the same procedure to set the minutes. Press
[mode] to confirm.
b) Setting the weekly program.
The programming starts automatically from day 1; to set the hour, use
the [+] and [-] keys. The [+] key sets the "Comfort" temperature, which is
indicated by full bar; the [-] key sets the "Night", which is indicated by an
empty bar. In order to program the 24 hours, press the [+] and [-] keys:
once one of the two keys has been pressed, the program will advance
automatically to the following hour. (as shown in the following picture):
Press [mode] to confi rm and advance to the following day. Once the
7th day has been confi gured, the program returns automatically to the
previous operating mode.
- 11 -
Night Antifreeze
*The version with Fil-Pilot is available for specific countries.
English
Chrono