General Information; Characteristics; Functions; Mounting - Cordivari 5150990000002 Manuel D'utilisation

English

1. General information

The instructions referred to in this document refer to the remote control
code. 5150990000002 compatible with digital thermostats with IR
receiver.

2. Characteristics

Galaxy is a remote control for Selmo chronothermostats, equipped with
a large backlit display and ergonomically designed, with a magnetic joint
for its wall-mounted remote control holder. Galaxy is equipped with a dual
infrared transmitter to optimise communication with the thermostat, open
window function, behavioural marker and presence detector.
Product
Applications
Colour
Display
Keypad
Temperature setting
Mode setting
Modes of operation and
activated functions
Selectable temperature range
Operational temperature
range
Battery type
Signal transmission
Dimensions

Mounting

Warranty

3. Functions

The remote control has 7 possible modes of operation:
• Comfort Mode
• Night Mode
• Antifreeze Mode
• Fil-Pilote Mode
• Crono Mode
• Boost 2h Mode
• Stand-by Mode
N.B. for a thorough description of the operating modes, please refer
to the thermostat user manual.
ECO function: Fast activation mode; through the dedicated key, the
function lowers the temperature by 3°C.
Functions:
• Open window detection
• ASC
• Key lock.
N.B. these modes are not available on every model of clock
thermostat.
Option of setting "Comfort" and "Night" temperature.
*The version with Fil-Pilot is available for specific countries.
User manual
Remote control
Thermostats and chronothermostats
for towel warmers or radiators
White
LCD
Keypad with 7 keys
Digital
Digital
Comfort, Night, Antifrost, Stand-by,
Crono, Fil-Pilote, Boost 2h, ECO,
Open window detection, ASC, Key
lock
7°C + 30°C
-10°C + 40°C
2x1,5V, AAA type
Infrared (through two transmitters)
100 x 52 x 29mm (H x L x l)
Wall mounting through the specifi c
support
2 years
Daily and weekly program, for the user to set as desired. Display with
permanent indication of the set temperature, time and mode of operation.
4. Mounting
To fix the remote control to the wall, it is possible to use the double-sided
adhesive strips on the remote control holder, to which a small amount of
silicone glue supplied in the tube in the package can be added to allow a
better fixing. There are also a screw and a dowel for wall mounting with
hole.
Dowel dimensions: Diameter 5mm, Length 25mm.
To position the remote control in the holder, insert it from top to bottom,
matching the tooth of the holder with the hole on the remote control.
Alternatively, it is possible to use the special base for support on flat
surfaces (e.g. a table, shelf, etc.)
Double-sided
adhesive tape
Glue Area
Characteristics
Dual and
simultaneous
infrared
transmitter
- 10 -
Removable plastic panel
Batteries
2 x AAA 1.5V
Cod. 1910000000308 - nv01