Télécharger Imprimer la page

Cornat DEN11 Notice De Montage Et D'utilisation page 3

Publicité

Instruction-manual:
Please note the following points before installation:
- Installation should only be performed by experienced technicians
under the consideration of DIN1988 and VOB.
- Before starting the installation, please stop the water supply (ideally close the main valve at the water meter).
- Please make sure that during assembly all seals fit properly (Always check - water damage possible)
- The fitting is suitable for use in private households and only in rooms with a temperature above 0 ° C.
If there are a risk of frost, the water supply should be interrupted and the valve must be completely emptied.
- Always before the first use and when a fitting has not been used for a prolonged period, you should let rinse
out a larger amount of water (water stagnation) before drinking water is taken!
- Important MOUNTING Note:
The flexible connection hoses may only be hand screwed into the fitting.
Do not use under any circumstances tools like pliers or wrenches.
Operating-conditions:
Hot water temperature
Test pressure
Operating pressure
Holding pressure for shower conversion
(To keep noise level DIN 4109 pressure reducers have to be installed in the main line
for pressures of more than 6 bar).
Care-instructions:
Sanitary taps require special care. Please note the following information:
Chrome surfaces:
are sensitive for chemicals, acid-containing cleaning supplies and all kinds of abrasives.
Occasionally clean with soapy water, using a soft cloth. Remove lime deposits with household vinegar.
Gilded surfaces:
are particularly sensitive to abrasives. Clean as chrome surfaces. Light polishing with a silver polishing cloth
brigthens.
Colored surfaces:
The surfaces of these taps are sealed with a special baking varnish. Do not clean with abrasive, corrosive or
cleaners containing alcohol. Clean only with cold water and a soft cloth or leather.
Surface damages can be expected especially in gilded and colored fittings
for inobservance of care instructions. Warranty claims will not be asserted.
max. 80 ° Celsius
max. 16 bar
max. 10 bar
min. 0.8 bar

Publicité

loading