Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION (continued):
YOKE MOUNT INSTALLATION
Please refer to Table 1 for torque spec on all bolts/screws.
Note: Adjustable angle is 0-90°
1. Remove the bracket mounting screws on the fixture and run the wires through the bracket. (Fig. 9)
2. Install the bracket on the fixture. (Fig. 10)
3. Drill holes on the mounting surface as shown. (Fig. 11)
4. Secure expansion bolts into the wall. (Fig.12)
5. Connect the fixture to the bracket and tighten the bolts to spec; connect the wires properly and put them into the
junction box. (Fig. 13)
9
11
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
Rev. 6/5/2018
77mm
(3")
10mm
(0.391")
(25/64")
13
Fixture
Adjustable
0-90º
10
12
Expansion Bolt
(included)
Yoke Mount
Bracket
Publicité
