Eiko HBX3 Serie Instructions D'installation

INSTALLATION INSTRUCTIONS
HBX3 Series
LED Monopoint High Bay
O R D E R
I T E M #
C O D E
13553 HBX3-150-50-U
13554 HBX3-200-50-U
OVERVIEW
WHAT'S IN THE BOX
• HBX3 fixture
• 10 ft (3.3 m) power and dim-
ming cord
• Hanging hook with safety
screw
• 3 ft (0.9 m) quick clip steel
safety cable
IMPORTANT
Before installing fixture, read all instructions and retain for future reference. The important instructions and safeguards that appear in this document are not inclusive of all
possible conditions and situations that may occur. It must be understood that common sense, caution, and care are factors that cannot be built into a product. These factors
must be supplied by those that care for and operate the fixture.
For additional information not covered in this document please contact a local representative.
WARNING AND SAFETY
• Risk of electric shock!
• Ensure power is OFF at the electrical panel before starting installation or maintenance
• Verify site supply voltage matches luminaire product label
• Ensure the cover is closed during operation
• Modifications to the product will void warranty
• Ambient temperature range under normal operation not to exceed;
Fixture: 100W/150W/240W: -40°F to 131°F (-40°C to 55°C)
200W/300W: -40°F to 122°F (-40°C to 50°C)
with motion sensor: -13°F to 122°F (-25°C to S0°C)
• Wiring to fixture must be in accordance with the National Electrical Code and all applicable local electrical and safety regulations
1
©2022 EiKO Global, LLC. World Headquarters: 18000 W. 105
O R D E R
I T E M #
C O D E
13557 HBX3-PS240-40-U
13558 HBX3-PS240-50-U
13559 HBX3-PS300-40-U
13560 HBX3-PS300-50-U
WHAT YOU'LL NEED
• Wiring supplies as per national and local electrical codes
• #2 Phillips screwdriver
• Safety glasses
Head Office, Canada: 80-86 Carrier Drive Toronto, ON Canada M9W 5R1 (P) 1.888.741.2673 (F) 1.888.705.1335
O R D E R
I T E M #
C O D E
13561 HBX3-PS150-40-V
13562 HBX3-PS150-50-V
13563 HBX3-PS240-40-V
13564 HBX3-PS240-50-V
13565 HBX3-PS300-40-V
13566 HBX3-PS300-50-V
One of the following are required to mount
A. Optional HBX3-YK or HBX3-YK-L yoke mount,
Plus to suspend or secure (field provided);
o
o
B. Hanging Chain
C. Conduit to fixture (1/2" or 3/4" NPS)
Street, 3 Floor, Olathe, KS 66061 (P) 1.800.852.2217 (F) 1.800.492.8975
th rd
O R D E R
C O D E
13567 HBX3-PS150-FCCT-H
13568 HBX3-PS150-FCCT-H-WH
13569 HBX3-PS240-FCCT-H
13570 HBX3-PS240-FCCT-H-WH
Mounting hardware for yoke or
Conduit to mount to yoke
I T E M #
eiko.com
Rev. 12/20/22