Eiko MWP1 Serie Instructions D'installation

INSTALLATION INSTRUCTIONS
MWP1 Series
Mini Wall Pack
O R D E R
I T E M #
C O D E
13930 MWP1-PS30-FCCT-U
OVERVIEW
WHAT'S IN THE BOX
• MWP1 fixture
• Integrated photocell
• Foam pad
• 3 wire nuts
IMPORTANT
Before installing fixture, read all instructions and retain for future reference. The important instructions and safeguards that appear in this document are not inclusive of all
possible conditions and situations that may occur. It must be understood that common sense, caution, and care are factors that cannot be built into a product. These factors
must be supplied by those that care for and operate the fixture. Consider a qualified licensed electrician for installation.
For additional information not covered in this document please contact a local representative.
WARNING AND SAFETY
• Risk of electric shock!
• Ensure power is OFF at the electrical panel before starting installation or maintenance
• Verify site supply voltage matches emergency batter and luminaire product lables
• Ensure the cover is closed during operation
• Modifications to the product will void warranty
• Ambient temperature range under normal operation not to exceed
Fixture: -40°F to 113°F (-40°C to 45°C)
• Wiring to fixture must be in accordance with the National Electrical Code and all applicable local electrical and safety regulations
WIRING SCHEMATIC
1
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
W A T T S
30/20/15W 3000/4000/5000K
WHAT YOU'LL NEED
• Wiring supplies as per national and local electrical codes
• #2 Phillips screwdriver
• Large Philips or flat head screwdriver
• Drill with bit sized for mounting screws/hardware
• Mounting hardware/screws for conduit wall mount (optional)
EiKO Canada, LLC: 7900 Goreway Dr. Unit 8, Brampton ON Canada L6T 5W6 (P) 1.888.741.2673 (F) 1.888.705.1335
C C T
Street, 3 Floor, Olathe, KS 66061 (P) 1.800.852.2217 (F) 1.800.492.8975
th rd
eiko.com
Rev. 03/27/23