Saris T-RAX Mode D'emploi page 2

FOR BALL TYPE HITCH:
Depending on the bumper, it may be necessary to add spacers (not included) for nut
to be accessible with a wrench (Fig. 1b).
HITCH TITE INSERTION
For 2" Hitch
Vehicle Hitch
1a
Assemble HitchTite as shown above for 2" hitch.
3
3
Insert Hitch Tite TM Bolt through washer and into hitch.
BALL MOUNT ONLY!
Secure tilt bracket to hitch following Fig. 1a. Note:
MOUNT THE RECEIVER
For 1-1/4" Hitch
Hitch pin can
be replaced
VEHICLE HITCH
with a 3/16"
shakle pad-
lock
Receiver Tube
1b
Assemble HitchTite as shown above for 1-1/4" hitch.
4
4
Tighten Hitch Tite TM bolt with 3/4" wrench.
SECURE RACK TO VEHICLE
Vehicle hitch
2
Insert receiver tube into hitch.
5
5
Insert cotter pin through hole to secure. Note: Cotter pin can be
replaced with a 3/16" shakle padlock for additional security.
2