Troubleshooting - Scheppach HSC120 Traduction Des Instructions D'origine

15. Troubleshooting

The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool fails to
work properly. If the problem persists after working through the list, please contact your nearest service workshop.
Malfunction
Stone doesn't break
Material doesn't lie flat
Cutting lever won't move
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Possible cause
Blade worn out
There are stone chips on the sup-
port
Stone chips in moving parts
Remedy
Change blade
Clean the support
Clean block splitter