Hazet 9048 P-2/3 Mode D'emploi page 20

5. Maintenance and care
WARNING!
Never point the opening of the outlet
at any person or object.
• Maintenance
• Always disconnect the tool from the com-
pressed air supply prior to carrying out
maintenance work.
• Damaged or worn components such as
O-rings and bearings, etc. must be replaced
and all moving parts must be lubricated.
• Only use spare parts recommended by the
manufacturer, as any other parts will invali-
date any express or implied warranty.
• Ensure that the relevant environmental pro-
tection regulations are observed when dis-
posing of individual parts, lubricants and
oils, etc.
20
3
Design and function
Always wear personal protective equipment!
^ hazet.com • ] info@hazet.de
• Never clean with solvents or acids, esters
(organic compounds comprising acids
and alcohol), acetone (ketone), chlorinated
hydrocarbons or oils containing nitro hydro-
carbons. Do not use any chemicals with a
low burning point.
• For customer service, please contact your
distributor or the HAZET Service Centre.
6. Malfunctions
If faults occur, check the following:
• Compression system and compressed air
supply line, air consumption l/min and hose
diameter according to the technical data of
the tool
• Check the compressed air for the occurrence
of dust, condensate and rust particles