Télécharger Imprimer la page

Herth+Buss Reanimator 1900 Notice D'emploi page 26

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
6.3 Charging the Reanimator's Internal Battery
using the Included Charger
EN
IMPORTANT
Only use the charger that was inclu-
ded with the Reanimator to charge
the internal battery of the Reanimator.
Using any other charger or using the
included charger for any other purpose
could result in personal injury or pro-
perty damage.
WARNING
Risc of electric shock or fire

6.4 This battery charger is for use on a
nominal 120 – 240V, 50/60 Hz circuit. The plug
must be plugged into an outlet that is prop-
erly installed in accordance with all local
codes and ordinances. The plug pins must fit
the receptacle (outlet).
www.herthundbuss.com
DANGER
6.5 Never alter the AC cord or plug provided
– if it does not fit the outlet, have a proper
outlet installed by a qualified electrician. An
improper connection can result in a risk of
an electric shock or electrocution.
6.6 An extension cord should not be used
unless absolutely necessary. Use of an im-
proper extension cord could result in a risk
of fire and electric shock. If an extension
cord must be used, make sure:
That the pins on the plug of the exten-

sion cord are the same number, size
and shape as those of the plug on the
charger.
That the extension cord is properly wired

and in good electrical condition.
That the wire size is large enough for the

AC ampere rating of the charger.
Recommended minimum AWG
size for extension cord:
30.5 meters long or less –

use a 1.0 mm
extension cord.
2
over 30.5 meters long –

use a 1.25 mm
extension cord.
2
95980701 | -702
26

Publicité

loading

Ce manuel est également adapté pour:

Reanimator 4400