Machine-Specific Safety Warnings; Functional Description; Intended Use; Product Features - Bosch GSC 2,8 Professional Notice Originale

OBJ_BUCH-598-001.book Page 12 Wednesday, November 14, 2007 10:16 AM
12 | English
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety meas-
ures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations differ-
ent from those intended could result in a
hazardous situation.
5) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.
Machine-specific
Safety Warnings
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
1 609 929 N55 | (14.11.07)
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The power tool is intended for cutting sheet met-
als without loss due to metal chips. It is suitable
for curved and straight cuts.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Auxiliary handle
3 Screw for auxiliary handle
4 Auxiliary-handle mount
5 Adjustment screw, upper cutter
6 Striker
7 Upper cutter
8 Fastening screw for upper cutter
9 Bottom cutter
10 Cutting base
11 Adjustment screw, bottom cutter
12 Fastening screw for bottom cutter
13 Setting gauge
The accessories illustrated or described are not includ-
ed as standard delivery.
Bosch Power Tools