Tonfly XP S 72-600 Manuel D'utilisation page 3

HELMET USE AND CORRECT FIT
To ensure maximum safety, it is important that your helmet is well fitted and comfortable.
It shouldn't be neither too loose and wobble around on your head, neither too tight and
press against your forehead or temples, in an unconfortable way.
A helmet that is too loose may lead to several situations: it will move around and up and down
on your head, it could slide and cover your eyes or turn to the sides, when you least want it to.
It can be noisy and let in wind; worst of all, it may come off in a crash.
Always make sure that the fastening system (strap) is well fastened and holds the helmet
firmly on your head.
The helmet must not be used for other types of sports.
How to open the Chin Bar
How to open the Visor
How to properly fit TFX helmet
Fig.
Wear the helmet by grabbing it by its inner sides and extend them slightly
Make sure that the fastening system (straps) is firmly attached
Adapt the helmet on your head
Slide the chinbar down until you hear a click noise
The helmet must be worn so that it does not expose your forehead and does not push
uncomfortably against the nape of your neck.
The visor opens by pushing the hook out and up
with your thumb.
1
The Chin Bar opens by pushing
the button down with your
index finger as you lift up
the chin bar with your thumb.
Fig.
2
Fig.
3
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
Fig.
4
3