RDI AVALON Instructions Pour L'installation page 3

LEVEL RAIL
Warning: Always wear safety goggles.
COMPONENT LIST:
Check the kit to ensure all components are included. Glass slats are sold separately. Glass
installation for level rail only – not for use on stair applications.
A
B
C
D
E
F
G
A) Top Aluminum Beam – 1
B) Bottom Aluminum Beam with Support
Channel Inside – 1
C) Level Mounting Brackets – 4 (2 top, 2
bottom)
D) Top Glass Gasket – 9 (6' kit) / 12 (8' kit)
E) Bottom Glass Gasket (Pre-installed into
Bottom Beam) – 9 (6' kit) / 12 (8' kit)
F) 2-piece Support Foot – 1 (6' kit) / 2 (8' kit)
G) Hardware Pack – 1
TOOLS NEEDED:
– Safety goggles
– Tape measure
– Pencil
– Level
– Power screwdriver/drill
– Power saw
– Rubber mallet
– Silicone caulk
3