Coway aquamega 200C Mode D'emploi page 28

03 MAINTENANCE
How To Replace The Filter
N OTE
- New filters must be flushed out first before use.
- dispense the ambient water for 3 minutes before using the cold water.
Make sure that you run the ambient water to flush the filters properly before using the cold water.
 A fter replacing the filter, drain the remaining cold water to clean the cold water tank. 
(See "How to Clean the Internal Water Tank" on page 19)
28
8
After closing the top cover, open the T-valve.
9
Dispense the
before using the cold water to flush the filters.
10
Dispense the
cold water tank.
ambient water for 3 minutes
cold water for 3 minutes to flush