Coway aquamega 200C Mode D'emploi page 12

02 HOW TO USE
Buttons And Indicators (Aquamega200C)
LED Indication
Very Cold
Wi-Fi pairing
12
Cold water temperature
-  B lue : Very Cold 
-  W hite : Cold or The cooler is in operation for cooling.
Cold
Filter status
- Filter Good : The remaining filter capacity is 100% ~ 1%
- Filter Change : The remaining filter capacity is 0%
*  T oseethedetailedfilterremaininginformation,
Wi-Fi status
Depending on the Wi-Fi status, the LED will be on, off, 
or blinking.
On : Connected
* FollowtheinstructionsbelowtosetupWi-Fi.
Blink : Disconnected
O : Wi-Fi O
Press and hold the Ambient and Cold water buttons together
to activate the Wi-Fi pairing mode and follow the instruction.
Go to www.cowaymega.com/instructions for Wi-Fi pairing instruction
and other video instructions.
(When the temperature of the water in the cold tank is
lower than 50~55 ℉)
(When the temperature of the water in the cold tank is
higher than 50~55 ℉)
downloadandinstalltheCowayIoCare®mobileapplication.
Set Wi-Fi for
the Coway IoCare® application