Coway aquamega 200C Mode D'emploi page 14

02 HOW TO USE
How To Get The Desired Water
To use continuous dispensing mode (cold/ambient water)
To use automatic dispensing mode
14
Select the desired water temperature first (Cold/
Ambient) Press and hold the dispensing button for
2 seconds then you can get the water for 3 minutes
continuously.
*  ifyoupressthedispensingbuttonagainduringdispensing,itwillstop.
2 sec
3 min
After selecting the desired water temperature
(Cold/Ambient), set the desired amount of
dispensing water. You can select the amount in the
order of 4 oz → 8 oz → 16 oz.
*  H owtochangethedefaultvalueofamount
The_default_value_of_amount_from_the_factory_is_4_oz._You_can_
change_the_default_value_by_following_the_direction_below.
1.Presstheamountbuttonfor2secondsthentheamountindicatorwillblink.
2.Presstheamountbuttonagainuntiltoselectthedesiredamount.
3.Presstheamountbuttonfor2secondstosavethesetting.
N OTE
When dispensing cold/ambient water, the dispensing
display lamp will be lit in sequential order.