sunjoe HJ605CC Manuel D'utilisation page 13

4. Rotate the cutting head to the desired cutting angle while
pressing the angle adjustment button (Fig. 26).
Fig. 26
5. Release the button when the cutting head is fixed into the
desired angle.
Starting + Stopping
1. To power ON, push and hold the safety lock-off button
with your thumb, while pressing the ON/OFF trigger
switch with your forefinger. Once the trigger switch
engages, you can release the safety lock-off button and
proceed with operation (Fig. 27).
Safety lock-off button
Fig. 27
ON/OFF
trigger switch
NOTE: The safety lock-off button reduces the risk of
accidental starting.
2. To power OFF, simply release the ON/OFF trigger switch
(Fig. 26).
3. If using the telescoping pole, push and hold the safety
lock-off button on the handle with your thumb, while
depressing the ON/OFF trigger switch on the handle with
your forefinger. Once the trigger switch engages, you
can release the safety lock-off button and proceed with
operation (Fig. 28).
Angle adjustment
button
4. To power OFF, simply release the ON/OFF trigger switch.
m
growth. If the blades slow down, then reduce your cutting
pace. Should the blades jam, release the trigger immediately.
Do not use your fingers to free up jammed blades. Jammed
blades can release suddenly causing serious injury.
m
in a clean and clear work environment before switching on the
grass shear + hedge trimmer.
NOTE: The yellow charge indicator LED light will illuminate
when the battery is running low and requires charging.
Trimming Tips
m
operation. Never use the telescoping pole with the hedge
trimmer for trimming hedges.
NOTE: Try to keep the cutting device angled at approximately
15° to the cutting surface (Fig. 29).
13
Fig. 28
Safety lock-off
button
CAUTION!
Do not force the blades through dense
CAUTION!
Always ensure proper footing and balance
WARNING!
Only use the hedge trimmer blade for this
15°
Fig. 29
ON/OFF
trigger switch