Venmar AVS KUBIX VRC 44102 Guide D'utilisation page 8

2. Controls
2.2 Altitude Main Control
Pressing on MODE / PREF key (D) successively allows to go from Ventilation
mode to Recirculation mode and then to Program mode (VENT
and PROG on control screen).
3
• In Ventilation Mode, use
(displayed in
• In Recirculation mode, use
(displayed in
• In Program mode, use
changing them (the period icons are displayed in
Pressing once on A allows to turn the ventilation unit in Smart mode. On this
mode, the ventilation unit operation will be driven by the outdoor temperature and
by the indoor conditions. Press once more to exit Smart mode.
The Program Mode allows the user to customize the operation of his/her ventilation
unit, for week and weekend days. All days are divided in 4 periods. The periods
starting hour and ventilation speed are factory set (see below).
To change these values:
Press on SET key (B) for 3 seconds, PROG (for program) will appear on screen,
and week days will flash.
NOTE: You can exit Periods setting by pressing on SET key (B) for 3 seconds any
time in the process, or wait 60 seconds.
• Use
• Press SET key (B) to confirm the choice, and go to setting daily Period 1.
(Period 1 will appear on screen, and hour display will flash.)
• Use
NOTE: Time changes by 15 minutes increments.
• Press SET key (B) to confirm and go to select the ventilation speed or type
(will flash on screen).
• Use
• Press SET key (B) to confirm and go to daily Period 2. (Period 2 will appear
on screen, and hour display will flash.)
Proceed as for Period 1 for all daily periods. Once the ventilation speed or type
for daily Period 4 has been selected:
• Press SET key (B) to confirm.
NOTE: If the week days were the first to be set, the weekend days will appear
on screen; but if the weekend days were the first to be set, then the
week days will appear on screen.
(Period 1 will appear on screen, and hour display will flash).
• Set periods as described above.
(cont'd)
in all options except RECIRC).
13
, OFF, MAX).
13
S P
ETTING ERIODS FOR PROGRAM MODE
D
AILY PERIODS DEFAULT SETTINGS
P
ERIOD
P 1 (M
ERIOD ORNING
P 2 (D )
ERIOD AY
P 3 (E
ERIOD VENING
P 4 (N )
ERIOD IGHT
to select between setting week days or weekend days.
to select the period starting hour.
to select the ventilation speed or type.
(cont'd)
to change the ventilation speed
to change the recirculation speed
to review the period settings without
S H
TARTING OUR
) 6:00
AM
9:00
AM
) 5:00
PM
11:00
PM
8
, RECIRC
5
).
7
M
ODE
MIN
20 /
MIN H
MIN
20 /
MIN H
4