Publicité
Les langues disponibles
Les langues disponibles
CAUTION
1. If the screws come into contact with water or chemicals, it is necessary to remove them in order to prevent
their corrosion;
2. In case the product is totally or partially installed outdoor, a protection againts water is recommended;
3. The transparent cover has the role of protection against accidental actuation of the red button.
SENSOR CONNECTION WITH SOLENOID VALVE
The connection between the gas sensor and the solenoid valve is play & play without other adjustments.
A. The black wire is connected to the "-" from the "-" solenoid valve.
B. The white wire is connected to the "+" from the "+" solenoid valve.
C. Power supply 230V c.c.
Reccomended cable:
1. Cable: 2 x 0.3 mm² or bigger
2. Cable length <20 meters
7
EN
Publicité
