flamco Logotherm LogoTronic Instructions D'utilisation page 16

9. "Flamconnect" app for Logotherm LogoMatic G2
stations
Download App: via www.flamcogroup.com
For current system requirements, please see the description in the relevant App Store
a.) Play Store - Android version
b.) iOS App Store - Apple version
Once the app has been downloaded, installed and launched, the QR Code scanner in the app must
be used to connect/assign the station in question with/to the app via Bluetooth®.
16
LogoTronic HIU Controller für LogoMatic G2
The LogoMatic G2 station can only be set and operated using a smart
device with the "Flamconnect" app installed. One smart device can be
connected to one controller at a time.
The app is also a tool to help the expert with commissioning, logging,
monitoring and diagnosis.
Note: At least the following conditions must be met to use the app and
create the interface between the end device and the LogoMatic G2:
-IOS firmware = 12 or higher
-Android firmware = 6 or higher
-The app must be able to access the camera
-Bluetooth® 4.0 or Bluetooth® LE