Signature Control Systems EZ Pro Jr. Indoor 8204 Guide D'installation Et De Programmation page 14

PROGRAMMING INSTRUCTIONS
Set Start Times
A START TIME is the time of day a program will start running.
™
The EZ Pro Jr. Indoor allows three start times per program.
Turn the large dial to the START TIMES position. Press SELECT to select the
start time you want to set (1, 2, or 3). Press ADJUST to set the time of day
the program will start. Repeat as needed. Only one start time is needed.
Multiple start times will repeat the program. To delete a start time, select the
position between 11:59pm and 12:00am. The --:-- will appear indicating there
is no start time.
Start Time Stacking
™
The EZ Pro Jr. Indoor will stack start times if your program watering times
overlap another start time. The additional start time will begin when the first
cycle finishes.
Set % Water Budget
% WATER BUDGET changes the duration of run times in a program by the
percentage entered 0 - 200% (i.e., a 10 minute run time at 50% water budget
will run 5 minutes). This feature is useful when changes in weather occur.
If it is unusually dry, you may want to extend your run time for each zone in
a program. With % Water Budget, you can change one number, and all run
times in the program are adjusted.
If 24 hours of run time is exceeded 24 hr will flash on the LCD.
Turn the large dial to the % WATER BUDGET position. A % symbol will appear
on the LCD to let you know you are working on the % Water Budget amount.
Press ADJUST to choose the desired percentage amount.
10