Trevi DME 3228 Mode D'emploi page 12

The current weather forecast is the one highlighted by a black-outlined square box.
To obtain an accurate weather forecast & barometric pressure reading, you need to input your current altitude. After the reset of the
unit, it will enter altitude setting mode. Press "
Then enter your current altitude in meter or feet. Press "PRESSURE" to confirm and exit the setting.
You can also hold "PRESSURE" button to enter altitude setting mode during normal use.
Press PRESSURE button to select pressure unit between hPa, inHg & mb.
IN/OUT TEMPERATURE & HUMIDITY
Temperature reading is located on the upper left of the display and humidity is on the right of the temperature.
Press "C/F" button to select temperature unit C/F.
Press CHANNEL/SEARCH button to select indoor, Ch1, Ch2, Ch3 and auto-channel scrolling display modes.
IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of
how hot the heat-humidity combination makes it feels.
Press "Heat Index/Dew Point" button once to show the respective indoor or outdoor heat
index on the upper left display. "HEAT INDEX" icon will appear.
HEAT INDEX ALERT INDICATOR
During conditions indicating a high heat index, a Heat Index Alert Indicator will appear on screen.
Caution Exercise more fatiguing than usual
Extreme caution Heat cramps, exhaustion possible
P_12 P_12 P_12
P_12 P_12
" or " " to set the pressure unit in hPa, mb or inHg. Press "PRESSURE" to confirm.
DME 3228 DME 3228
DME 3228 METEO STATION DME 3228 DME 3228
ENGLISH ENGLISH
ENGLISH ENGLISH ENGLISH