Télécharger Imprimer la page

Nouvel PLANCHA KING Mode D'emploi page 16

Publicité

Les langues disponibles

Les langues disponibles

EN
Warning:
Tightness is to be checked outdoors, away from any
source of ignition.
• Make sure that the control switches are in the closed
position. After opening the bottle and resetting the
pressure relief valve, check that there are no bubbles
on all fittings, on the pressure relief valve and on the
appliance, using soapy water.
The presence of bubbles indicates a leak.
Before any use check the plancha cooking plate is clean
and gas controls in order to work; verify the burners
holes and gas nozzle zone is free from dirty, dust or
insects leavings. A clogged gas jet could lead to fire and
danger for users.
Close the gas bottle and tighten all the fittings.
Repeat the tightness test. If the leak comes from the
appliance, do not use your plancha and contact the
manufacturer or the retailer.
Test the tightness every time the bottle is replaced.
Danger:
Never test the tightness of your appliance with a flame.
Never use a leaking appliance.
It is recommended to wear protective gloves when
handling particularly hot components.
• The parts protected by the manufacturer must not be
handled by the user. None of the gas line components
are to be modified by the user. The gas containers that
can be used on this type of appliance range from 6 to
13 Kg (Dimension, height: 560 mm and depth: 310 mm
max., pressure relief valve included).
• Comply with the use-by dates of your hose, and
replace it if need be. Test the tightness every time the
hose is replaced. Check the position of the connecting
hose to ensure that it is not in contact with the hot
parts of the appliance.
• Be sure to replace the container away from any source
of ignition.
• Do not plug the vents and regularly check that they
are clean. If the venturis are clogged, contact the
manufacturer or your retailer.
• The underside of the appliance must remain clear to
allow for proper circulation of air to the burner.
• Do not modify the appliance, contact the manufacturer
or your retailer.
• Before using your plancha after a period of storage
and/or inactivity, check it carefully in order to detect
any gas leak and/or clogging of the burners.
• Do not modify the appliance, contact the manufacturer
or your retailerin of doubt or fault.
• Before using your plancha after a period of storage
//16
and/or inactivity, check it carefully in order to detect
any gas leak and/or clogging of the burners.
The following operation in particular are considered
wrong and dangerous use of the appliance:
• Use of coal, wood or fuel other than liquid gas butane,
propane or their mixtures.
• Use of the plancha as heater.
Directions for use
Lighting and operation of the plancha.
Before lighting your plancha, check that all the condi-
tions stated in the « Precautions for use » section are
met.
• Check that the control switch is on the « OFF »
position. Open the gas supply (bottle for butane/
propane).
• Rotate the control switch counterclockwise while
holding it down on the ignition to generate the sparks
required for lighting of the burners.
• Keep the control switch down for at least 5 seconds
afer lighting the burner.
• The device must not be operated for more than
15 seconds. If the burner has not lit, stop acting on the
device, open the enclosure door and / or wait at least
1 minute before any further attempts to ignite the
burner.
It is recommended to empty and clean the grease tray
after each use. The grease tray is to be handked only
when the plancha il cold.
Hot cleaning:
You have just finished cooking and your plancha is still
hot: use this opportunity to clean it.
Your cooking spatula and your stainless steel pad are
idel tools to temove all residue. Pour some water directly
onto the plate and srucb with your stainless steel pad to
move the excess matter towards the grease receptacle.
Use the spatula to handle the stainless steel pas to avoid
getting burnt.
Keep an eye on how full the grease tray is, to avoid any
overflow. Your plate is coated with two layers of enamel,
and is therefore fully compatible with using a stainless
steel pad. You can repeat the operation as often as nec-
essary. You can light your plancha again at any time if the
cleaning is not completely effective.
WWW.NOUVEL.CH
WWW.NOUVEL.CH

Publicité

loading

Ce manuel est également adapté pour:

5701344