Teeter Hang ups Contour Serie Instructions De Montage page 12

FIGURE 13
FIGURE 14
FIGURE 16
FIGURE 15
Turn Clockwise to Tighten the De-Rattler Function
Step 5
Attach the Crossbrace (NX-1400) to the Rotation Adjustment Arms
• Remove the pre-assembled Chicago Screw Posts from the Crossbrace (NX-1400).
• Align the holes in the Crossbrace with the last hole on the Rotation Adjustment Arms
(Figure 13).
• Insert the Chicago Posts (F5-0071-A) and secure with the Chicago Screws (F5-0071-B),
tightening with the Allen Wrenches (IA-1149) provided (Figure 14).
NOTE: Due to the tapered style of the Chicago Post, it may not sit flush against the
Crossbrace.
• Turn the Pinlock Knobs clockwise to re-engage the "de-rattler" function (Figure 15).